gp10ah thru gp10yh sintered glass passivated junction rectifier reverse voltage - 50 to 1600 volts forward current - 1.0 ampere features mechanical data * halogen-free type * compliance to rohs product * gprc (glass passivated rectifier chip) inside * glass passivated cavity-free junction * capable of meeting environmental standards of mil-s-19500 * high temperature soldering guaranteed: 260 o c/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * plastic package has underwriters laboratory flammability classification 94v-0 case : jedec do-204al molded plastic over glass body terminals : tin plated, solderable per mil-std-750, method 2026 polarity : color band denotes cathode end weight : 0.012 ounes , 0.3 gram maximum ratings and electrical characteristics ratings at 25 o c ambient temperature unless otherwise specified. maximum repetitive peak reverse voltage maximum average forward rectified current 0.375" (9.5mm) lead length (see fig.1) peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at 1.0 a maximum dc reverse current at rated dc blocking voltage t a =25 o c t a =125 o c t a =150 o c typical junction capacitance (note 1) typical thermal resistance (note 2) operating junction and storage temperature range symbols v rrm i (av) i fsm v f i r c j r ja t j ,t stg gp10 1.0 30 1.0 1.25 5 30 50 5 50 - 10 55 -65 to +175 units volts maximum rms voltage v rms volts maximum dc blocking voltage v dc ah 50 35 50 bh 100 70 100 dh 200 140 200 gh 400 280 400 jh 600 420 600 kh 800 560 800 mh 1000 700 1000 qh 1200 840 1200 vh 1400 980 1400 yh 1600 1120 1600 volts volts amps amps ua pf o c / w o c notes : (1) measured at 1.0 mhz and applied reverse voltage of 4.0 volts (2) thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, p.c.b. mounted. patented *dimensions in inches and (millimeters) patented patented tm zowie technology corporation rev. 0 do-204al 1.0(25.4) min. 1.0(25.4) min. 0.107(2.70) 0.034(0.86) 0.028(0.71) 0.205(5.20) 0.160(4.10) 0.080(2.00) dia. dia.
fig.2 - maximum non-repetitive peak forward surge current peak forward surge current, amperes number of cycles at 60hz 8.3ms single half sine-wave (jedec method) 5.0 10 15 20 25 30 1 10 100 fig.4 - typical reverse characteristics percent of rated peak reverse voltage,% instantaneous reverse leakage current, microamperes 0.1 0 20 1 10 100 t j =25 o c t j =25 o c t j =125 o c t j =150 o c 40 60 80 100 110 fig.5 - typical junction capacitance reverse voltage, volts .1 1 junction capacitance, pf 40 200 .2 .4 1.0 2 4 10 20 40 100 2 4 10 6 20 60 100 ratings and characteristic curves gp10ah thru gp10yh fig.1 - forward current derating curve average forward rectified current, amperes 1.0 0.5 0 0 25 50 75 100 125 150 175 resistive or inductive load ambient temperature, o c 0.375" (9.5mm) lead length zowie technology corporation rev. 0 fig. 3 - typical instantaneous forward characteristics gp10ah~gp10mh gp10qh~gp10yh instantaneous forward voltage, volts instantaneous forward current, amperes 0.01 0.10 1.00 10.0 20.0 0.6 tj = 25 o c pulse width=300us 1% duty cycle 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6
|
